Attitude

Scrap Kit Used Was Drama Beeotch by Miz which you can find on her blog HERE

Tube of choice. I am using the artwork of Jose Can which you can find HERE

Filters: Eye Candy 4000, Xero-Bad Dream, Alien Skin Xenofex 2 constellation

Open new blank canvas 600 x 600.
Flood fill black.
Copy and paste miz11-dramabeeotch-ele18 as a new layer and and resize 18%. Make sure all layers is deselected.
Add Eye Candy gradient glow with the following settings:

Duplicate 2 times and merge all 3 flowers.
Position in the top left corner. We are going to make a frame so
duplicate, free rotate 90, position at the bottom of your first flower layer.
Duplicate your bottom flower layer and position and the top. Now you can duplicate your fist flower side layer to make your final side.
Merge all flower layers down.
With your magic wand tool select inside the frame.
Selections, modify, expand 10.
Create a new raster layer and paste miz11-db-pp09 into selection.
Position your paper layer behind your frame.
Selections, select none.
Copy and paste your close up tube as a new layer and position behind the frame.
Make your paper layer active, Selection, select all, float, defloat, invert.
Make your tube layer active and hit your delete key. Selections, select none.
Apply xero radiance to your tube layer with the following settings:

Copy and paste full tube as new layer and position as shown in my tag.
Copy and paste miz11-dramabeeotch-ele01 as a new layer and position at the bottom of her leg.
Duplicate the flower.
Make your bottom flower active and go to your Eye Candy Swirl with the following settings :

Add eye candy gradient glow to your swirl and to the top flower layer.
Play with the position until it is how you like it, I tried to center it. Merge the flower down to the swirl.
Copy and paste miz11-dramabeeotch-ele06 as new layer, free rotate 23 to the right, resize 25%, gradient glow.
Copy and paste miz11-dramabeeotch-ele08 as new layer and resize 50%. Position as shown behind your ladybug, flower, and swirl. Duplicate your flower swirl layer and position on the left side of the ladybug and behind the feather layer.'
Duplicate your flower swirl layer once more and place next to the last swirl layer.
Duplicate the feather and position at the end behind the swirl.
Copy and paste miz11-dramabeeotch-ele09 as a new layer and position as shown, gradient glow. Duplicate and on the top star layer add Alien Skin Xenofex 2 constellation with the following settings :





Repeat.
Add © and any other desired txt.

Outcast

Scrap Kit Used Was Betrayed by Miz which you can find on her blog HERE

Tube of Choice. I am using the beautiful work of Barbra Jensen found HERE. This was a limited edition tube so you may have to use another. 

Filters: Eye Candy 4000, Xero-Bad Dream

Open a new blank canvas 600x600. Flood fill white.

Paste miz-tripframe as a new layer and resize with the following settings : 

Add your Eye Candy 4000 Gradient Glow filter the the frame layer with the following settings : 

Make sure both colors are set to black. Position frame in the top center of canvas.

With your magik wand tool set to : Mode: Shift, Match Mode: color, Tolerance: 4, Feather: 0

select inside each frame.

Selections, modify, expand by 3.

Add a new raster layer and paste miz-pp4 as new layer. Position behind frame layer.

Selections and select none.

Paste your close-up tube as a new layer and position this any way you would like in each of the frames. I just used my eraser tool to clean up the mess after each frame. Merge all tree tube layers as one and then apply xero's bad dream. I used the default settings.

Copy and paste your full tube as a new layer and position as shown. Now you can add xero's radiance if you would like. I did using the following settings : 

Pate miz-glitterspot1 and miz-glitterspot2 as a new layer and position as bottom 2 layers. I kinda just played around with them until they were set up where I liked. 

Paste miz-rose1 as a new layer and resize by 25%. Position at the bottom as shown. Repeat with miz-rose2.
Select your miz-rose1 and duplicate next to your black rose.
Select your miz-rose2 and place next to the miz-rose1. Duplicate miz-rose1 one last time and place at the end of your rose chain.
 Now your rose chain should be blue, black, blue, black, blue.
Now copy and paste miz-sparkles2 as a new layer and resize 80%. With your crop tool select the entire tag and crop. This will get rid of any extra outside of the canvas. Position your sparkle layer behind your frame layer.
Copy and paste miz-dragonfly as a new layer, position at the top of all layers and resize 30%. Position your dragonfly ontop of your last black rose. Add gradient glow with the same black settings as before.
Copy and paste miz-lips2 as new layer, resize 10%, position at the bottom of the first frame as shown, add gradient glow. After all that duplicate and mirror so you have a copy on the right hand frame. Now repeat the lip steps with miz-lips1, positioning them slightly below the black lips but still as the top layer.
Merge all of your lip layers, duplicate, flip, and position at the top of your frames.
Copy and paste miz-diamondrain as a new layer.
Resize 65% and add gradient glow.
Position as the bottom layer and move to the left edge of the canvas. Duplicate and position on the right hand side.
Now go back up to your glitter spot layers  ... miz-glitterspot1 and miz-glitterspot2. Duplicate each layer one time resing just your new layers 65%. Position these at the bottom of the tag ... it should be positioned just slightly below the original sized spots. Move your two smaller spots so the are beneath your diamondrain layers. Keep the larger spots where they were.
Add your copy-rite and any other text. :)

Come Play

Kit: Unintended by Black Widow you can find her work  HERE

Tubes by Ismael Rac. You can find his work HERE You can use 3 different or just one it is all up to you. :)

Mask by Vix. I used 414 and you can grab it HERE

 Filter Eye Candy 4000 gradient glow

 Open blank canvas 600 x 600

Selections - select all - paste paper 9 into selection - selections - select none - merge group and duplicate twice for a total of 3 mask layers - merge visible and rename mask - new raster layer renamed canvas - flood fill black and position behind the mask - make mask layer active - selections - select all - copy and paste image 36 into selection - select none - copy and paste image 25 as new layer - resize 45 %  with the following settings:

On the image it will have 50 % just ignore and make it 45 ... I am a woman ... I change my mind!

Image - free rotate 60 to the left - position in the top left corner - rename left frame - filters EC4000 gradient glow with the following settings:

duplicate - mirror - rename right frame - hide mask layer, canvas layer, and right frame - with your magic wand tool select inside the left frame - selections - modify - expand 5 - new raster layer - copy and paste paper 3 into selection - rename left paper and position behind the frame select none - repeat on the right frame - Copy and paste one of your tubes behind the right frame but above the paper - erase all extra tube that shows around the frame - change blend mode to hard light - repeat on the left - paste your final tube in the center of the two frames - copy and paste image 9 as a new layer - resize 60% and position in top right corner behind all layers except canvas - copy and paste image 44 as new layer and position behind all layers except canvas - change blend mode to hard light and duplicate 4 times to spread across the bottom - copy and paste image 47 as new layer - mirror - resize 50% - position in bottom left corner - copy and paste image 12 as new layer - resize 40 % and position over coffin as shown - add a drop shadow to your liking - copy and paste image 38 as new layer - resize 50% position above the rose layer in the bottom left - copy and paste image 26 - resize 40% position behind skull -  copy and paste image 10 - resize 50% - mirror - position above skull layer ( you may need to move the skull some ) - copy and paste image 36 as new layer - resize 50% and position bottom left  behind the bird and skull.  

I have my layers in this order :

Crow

Skull

Stars/Sparkles

Pink ... ummm ... thing

Rose

Coffin

Now you can add any txt you would like but make sure you add your ©

Lovely Little Kitty

SUPPLIES

Scrap Kit: Besamie by Black Widow Creationz found HERE

Tube of choice. I am using Emo Kitty by PinUp Toons found HERE

Mask : 142 by Vix found HERE

Filters: Eye Candy 4000

Open new blank canvas 500 x 500 - Selections - select all - c/n/p paper 8 into selection - select none - merge group - duplicate - name the bottom layer 1 and the top layer 2 - adjust - apply noise to layer 2 (Gaussian monochrome 100) - repeat - on layer one add Eye Candy Gradient Glow with the following settings : 

Merge 1 and 2 down.

C/N/P raster one of your tube as a new layer and position at the top of your layer bar - rename tube - image - resize with the following settings :

Position tube in the middle of your mask layers and add a drop shadow that you like to your tube layer - c/n/p element 5 and resize by 50%  with all the other settings the same as before - position at the bottom of her feet - Gradient Glow (same as before) - duplicate - position one ribbon behind the tube and position the other on top of the tube - with your eraser tool erase the ribbon on the top ribbon layer at the bottom of her feet, her knees, and at kitty's feet - C/N/P element 14 as a new layer - resize 50% - free rotate 45 to the left and position as shown - duplicate - on the top layer add noise (same settings as before) on the bottom layer add gradient glow -C/N/P element 12 as a new layer - resize 50 % - free rotate left 45 - gradient glow and position as shown - C/N/P element 44 as new layer - resize 50% - repeat - gradient glow - duplicate 4 times and position as shown - C/N/P element 30 as new layer and resize 70 %  - position at bottom - gradient glow - duplicate - and position one layer at the very top of the layer bar and one el 30 layer beneath the "LOVE" element - with your eraser tool erase the large flower on the top layer that overlap "love" and the butterfly - C/N/P element 60 - resize 50% - garadient glow - position top right - duplicate - mirror position both heart layers below all frames - C/N/P el 17 as a new layer - resize 50% - free rotate 45 - gradient glow - mirror - position as shown below all layers except the mask and heart layers

Add any txt/saying you wish and make sure to add your © ;)

BEEAUTIFUL

SUPPLIES NEEDED 

Scrap Kit: Sunflower Mornings by Mystical Illusionz Scraps found HERE

Vix Mask 101 found HERE

Tube by  

Open new blank canvas 500 x 500.

Selections - select all - c/n/p paper 1 into selection - select none.

Layers - new mask layer from image - Vix Mask 101 - source luminance selected - merge group.

C/N/P paper 5 as a new layer and then crop around the canvas - repeat mask step - resize brown mask layer by 80 %.

C/N/P tube as new layer and resize by 80 % - position in the bottom left corner and add a drop shadow of your liking. 

C/N/P element 1 as new layer and resize by 50 % - mirror and position in bottom right - add drop shadow.

C/N/P element 7 as new layer and resize by 50% - duplicate and position as shown - Eye Candy 4000 Gradient Glow with the following settings = Color settings Fat and both black = Basic - Glow Width 3.00 and default on the other settings.

C/N/P Element 18 as new layer and resize by 50 % - repeat resize - duplicate - mirror - drop shadow on both. 

C/N/P element 2 as new layer and resize by 20%  - position as shown.

Add © info and any text.

Devil's Kiss

Tube of choice. I am using Sympathy for the Devil found HERE

Scrap Kit is Forbidden Love found HERE

Mask by Vix 72 found HERE

Open a new blank canvas 600 x 600.

C/N/P paper 3 as a new layer and apply your mask. Merge group and duplicate twice for a total of 3 mask layers. Merge all three.

C/N/P Frame 7 as a new layer and resize 90% making sure all layers is deselcted.

C/N/P Raster 4 of your tube as a new layer and position behind your frame layer. Hide your mask layer. Make your tube layer active and position the woman inside of the first frame, hide the tube layer. Make your frame layer active and with your magic wand select inside of the first frame, selections, modify, expand by 3, invert. Make your tube layer active once more and hit delete, selections, none. Now you will repeat the frame steps with the next two frames and a different selection of the tube.

C/N/P Moon as new layer, resize 50% and position as shown.

C/N/P Tree as new layer and position as shown, duplicate and mirror.

C/N/P Rose as new layer, resize 30% and position in bottom left of center frame, duplicate and mirror.

C/N/P Begonia as a new layer and resize 15% position in top left corner of first frame as shown, duplicate, mirror.

C/N/P Sparkles as new layer and position towards the bottom of the frame behind the rose layer.

C/N/P Candle 2 as new layer and resize 30% position as shown.

ADD ALL © INFO and any other saying you wish.