Autumn Bliss

SUPPLIES NEEDED

PSP

PLUGINS: XERO-BAD DREAM AND ALIEN SKIN

SCRAP KIT: FALL INTO ME BY MYSTICAL ILLUSIONZ FOUND HERE

MASK 60 BY WEESCOTSLASS FOUND  HERE

TUBE OF CHOICE. I AM USING THIS BEAUTIFUL PIECE FROM UNHOLY VAULT DESIGNS FOUND AT MPT. CLICK THE IMAGE AND IT SHOULD TAKE YOU THERE.

Unholy Vault Designs - Firefly PSP Tubes

Open a blank canvas 600 x 600. C//N/P paper 3 as a new layer. Layers and then load your mask 60 from image or disk. Merge group and add xero, bad dream with the following settings:

Paste your square frame as a new layer and resize by 65% making sure that the all layer box is deselected. Hide your mask layer and make your frame layer active. With your magic wand select inside the frame and add a new raster layer. Selections, modify, expand by 8 and paste your paper 13 into selection, select none. Position your paper behind your frame and then make your frame layer active and add a drop shadow to your liking. I used 0,0,100,11.

Copy and paste your close-up as a new layer and position as shown.

 Now add a drop shadow to your liking(I am using the same as before).
Duplicate your tube layer and position one below the frame and one above. With your top tube layer turned off make your bottom tube layer active and erase her left arm and bottom so it is behind the frame. Repeat this step on the top tube layer.
Copy and paste your sparklestars as a new layer and position as top layer. Position at bottom of frame as shown.
Copy and paste your ray of light as a new layer and position behind the frame and to your liking. Erase all of the light that comes out from behind the frame.
Copy and paste real butterfly as new layer and resize 55%. Make sure all layers is deselected.
Free rotate the butterfly layer to the left 25% and add a drop shadow.
Now you can choose what leaves you would like to use or you can use 2,4,5 like I did. Copy and paste each leaf and resize each 15% add a drop shadow and position as shown.
Copy and paste gerber as new layer, add drop shadow, resize 15%, position as shown.
Copy and paste doodle as a new layer and position in the corner as shown and as the bottom layer. Add a drop shadow.
Add © and any wording you would like and save. :)

Tainted Love

SUPPLIES NEEDED

PSP XI

PLUGINS : Eye Candy 4000

SCRAP KIT : Tainted Love by Mystical Illusionz found HERE

MASK : 43 by Urban Fairytales found HERE

TUBE OF CHOICE OR ELIAS ;) I am using

Elias Chatzoudis - Starfighter

 If you choose to use a different tube it will be best if it has a close up as well.  

1. Open new blank canvas 600 x 600

2. Selections - select all - paste MIZ_pp11 into selection - select none

3. Layers - new mask layer - from image UFMask43 with source luminance selected - merge group - rename this layer MASK and hide.

4. Copy and Paste (AKA C-N-P or C/N/P) MIZ_stampframe2 as a new layer - resize 65% and make sure all layers is deselected - rename this layer FRAME.

 5. With your magic wand tool hold down Alt and select the inside of each frame (make sure feather is set to 0) - Selections - Modify - expand 5.

6. Add a new raster layer and  C/N/P MIZ_pp8 into selection - select none and position the paper layer behind your frame.

7. Make your frame layer active - Effect - Plugins - Eye Candy 4000 - Gradient Glow with the following setting : 

8. Now this is where a working knowledge of psp or even better ... the ability to read my mind comes in. 

C/N/P Layer 1 of your tube or the close up of the tube you selected as a new layer - position behind the FRAME layer and above the paper so it has a certain part of the body that you wish inside that frame. Here let me post a pic lol so you have some kinda idea about my ramblings. 

 9. Hide the tube layer and make your frame layer active. With your magic wand select inside your frame - selections - modify - expand 5 - selections - invert - make your tube active again - delete - selections none.

10. Repeat with the right frame and a different body part.

11. C/N/P Raster 1 of your tube and position as shown.

12. Add a drop shadow with the following settings 

0;0;100;3;black

 13. Now duplicate that layer and position one layer above the frame and one below - eraser tool - erase her right foot on the top tube layer. You should have it looking like this : 

 14. Now you can make your MASK layer visible if you would like. C/N//P MIZ_rayoflight as a new layer and position at the very top center of your canvas. This ray should be the second layer. Your layers should be lined up like this.

15. C/N/P MIZ_lightfantasy as a new layer and position this behind your left frame layer or behind all but the pink paper layer.

16. C/N/P MIZ_diamondrain as a new layer and position behind all but MASK layer.

17. C/N/P MIZ_girlyskul2 as a new layer - position above FRAME and resize skull 25% - image - free rotate 20 right (make sure all layers is deselected) - gradient glow with the same settings as before.

Add any txt you wish but please make sure you add all © info.

Witchy Woman

SCRAP KIT : The Witching Hour

TEMPLATE : Bat Wing Soup

TUBES OF YOUR CHOICE. I USED THE BEAUTIFUL WORK OF : BARBARA JENSEN

PSP XI

PLUGINS EYE CANDY 4000

1. Open your Wing Bat Soup template.
2. Delete you © info.
3. Make your orange shape top layer active - selections - all - float - modify - expand 1.
4. C-N-P PP11 as a new layer - invert - with your paper layer active - delete -selections none - merge down.
5. Repeat steps 1-4 on layers orange shape bottom and large orange rectangle.
6. Make your bat layer active - image - mirror - flip  - resize - 60 % making sure all layers is deselected - resize by 60 once more.
7. Duplicate your bat layer twice so you have a total of 3 bats. :)
8. Position your bats to your liking or like mine - merge all three down.
9. Effects - plugind - eye candy 4000 - gradient glow with the following settings :

10. Make your White shape outline layer active - selections - all - float - expand 1 - flood fill with a Halloweenie looking gradient or really any color you think looks good. :P 

11. Make your middle white circle layer active - selections - select all - float - defloat - modify - expand.

12. C-N-P PP3 into selection - select none.

13. Repeat steps 11 and 12 to the last two white circle layers.

14. Adjust - add/remove noise to all three circle layers with the following settings.

15. Add a gradient glow to all three circles with the same settings as before.

16. Make your white rectangle layer active - selections -select all - float - defloat - modify - expand 1 and flood-fill with #6a190a - selections - select none - gradient glow as before.

17. Repeat step 16 with your white stripe layer and with the color #e37626.

18. Duplicate pixel word art and position on the right side as shown in mine.

19. Paste you tube of choice as new layer and position as shown.

20. With your second tube c/n/p as a new layer and position to your liking behind the orange rings. 

21. Make your orange circle layer active - selections - select all - float - defloat - invert.

22. Make your tube layer active ( tube behind the ring) carefully erase around the orange ring. 

23. Repeat this step to the other two rings and with a different body piece.

24. Change the circle tube layers blend mode to hard light.

25. With your crop tool crop around the entire canvas.

26. C/N/P WP_WH_PANSY as new layer and resize 65% and position as shown.

27. C/N/P WP_WH_PASIGN as new layer - gradient glow with same settings - position as show.

28. C/N/P WP_WH_CAULDRON as new layer - resize 50% and position as shown - add a drop shadow. I used black 0 and 0.

29. C/N/P WP_WH_FLAMINGGHOST as new layer and position behind the 3 circle layers as shown .

30. C/N/P WP_WH_PNG as new layer and resize 30% -drop shadow - mirror - position as shown.

31. C/N/P WP_WH_spiderweb as new layer and resize 50 position as shown - duplicate - position one layer as the  very top layer and one layer behind your White shape outline layer. With your eraser tool erase outside of your outline layer on both web layers.

32. ADD © INFO  and any other text you wish.

Delete backgound layer if you wish.