Come Play

Kit: Unintended by Black Widow you can find her work  HERE

Tubes by Ismael Rac. You can find his work HERE You can use 3 different or just one it is all up to you. :)

Mask by Vix. I used 414 and you can grab it HERE

 Filter Eye Candy 4000 gradient glow

 Open blank canvas 600 x 600

Selections - select all - paste paper 9 into selection - selections - select none - merge group and duplicate twice for a total of 3 mask layers - merge visible and rename mask - new raster layer renamed canvas - flood fill black and position behind the mask - make mask layer active - selections - select all - copy and paste image 36 into selection - select none - copy and paste image 25 as new layer - resize 45 %  with the following settings:

On the image it will have 50 % just ignore and make it 45 ... I am a woman ... I change my mind!

Image - free rotate 60 to the left - position in the top left corner - rename left frame - filters EC4000 gradient glow with the following settings:

duplicate - mirror - rename right frame - hide mask layer, canvas layer, and right frame - with your magic wand tool select inside the left frame - selections - modify - expand 5 - new raster layer - copy and paste paper 3 into selection - rename left paper and position behind the frame select none - repeat on the right frame - Copy and paste one of your tubes behind the right frame but above the paper - erase all extra tube that shows around the frame - change blend mode to hard light - repeat on the left - paste your final tube in the center of the two frames - copy and paste image 9 as a new layer - resize 60% and position in top right corner behind all layers except canvas - copy and paste image 44 as new layer and position behind all layers except canvas - change blend mode to hard light and duplicate 4 times to spread across the bottom - copy and paste image 47 as new layer - mirror - resize 50% - position in bottom left corner - copy and paste image 12 as new layer - resize 40 % and position over coffin as shown - add a drop shadow to your liking - copy and paste image 38 as new layer - resize 50% position above the rose layer in the bottom left - copy and paste image 26 - resize 40% position behind skull -  copy and paste image 10 - resize 50% - mirror - position above skull layer ( you may need to move the skull some ) - copy and paste image 36 as new layer - resize 50% and position bottom left  behind the bird and skull.  

I have my layers in this order :

Crow

Skull

Stars/Sparkles

Pink ... ummm ... thing

Rose

Coffin

Now you can add any txt you would like but make sure you add your ©

Lovely Little Kitty

SUPPLIES

Scrap Kit: Besamie by Black Widow Creationz found HERE

Tube of choice. I am using Emo Kitty by PinUp Toons found HERE

Mask : 142 by Vix found HERE

Filters: Eye Candy 4000

Open new blank canvas 500 x 500 - Selections - select all - c/n/p paper 8 into selection - select none - merge group - duplicate - name the bottom layer 1 and the top layer 2 - adjust - apply noise to layer 2 (Gaussian monochrome 100) - repeat - on layer one add Eye Candy Gradient Glow with the following settings : 

Merge 1 and 2 down.

C/N/P raster one of your tube as a new layer and position at the top of your layer bar - rename tube - image - resize with the following settings :

Position tube in the middle of your mask layers and add a drop shadow that you like to your tube layer - c/n/p element 5 and resize by 50%  with all the other settings the same as before - position at the bottom of her feet - Gradient Glow (same as before) - duplicate - position one ribbon behind the tube and position the other on top of the tube - with your eraser tool erase the ribbon on the top ribbon layer at the bottom of her feet, her knees, and at kitty's feet - C/N/P element 14 as a new layer - resize 50% - free rotate 45 to the left and position as shown - duplicate - on the top layer add noise (same settings as before) on the bottom layer add gradient glow -C/N/P element 12 as a new layer - resize 50 % - free rotate left 45 - gradient glow and position as shown - C/N/P element 44 as new layer - resize 50% - repeat - gradient glow - duplicate 4 times and position as shown - C/N/P element 30 as new layer and resize 70 %  - position at bottom - gradient glow - duplicate - and position one layer at the very top of the layer bar and one el 30 layer beneath the "LOVE" element - with your eraser tool erase the large flower on the top layer that overlap "love" and the butterfly - C/N/P element 60 - resize 50% - garadient glow - position top right - duplicate - mirror position both heart layers below all frames - C/N/P el 17 as a new layer - resize 50% - free rotate 45 - gradient glow - mirror - position as shown below all layers except the mask and heart layers

Add any txt/saying you wish and make sure to add your © ;)

BEEAUTIFUL

SUPPLIES NEEDED 

Scrap Kit: Sunflower Mornings by Mystical Illusionz Scraps found HERE

Vix Mask 101 found HERE

Tube by  

Open new blank canvas 500 x 500.

Selections - select all - c/n/p paper 1 into selection - select none.

Layers - new mask layer from image - Vix Mask 101 - source luminance selected - merge group.

C/N/P paper 5 as a new layer and then crop around the canvas - repeat mask step - resize brown mask layer by 80 %.

C/N/P tube as new layer and resize by 80 % - position in the bottom left corner and add a drop shadow of your liking. 

C/N/P element 1 as new layer and resize by 50 % - mirror and position in bottom right - add drop shadow.

C/N/P element 7 as new layer and resize by 50% - duplicate and position as shown - Eye Candy 4000 Gradient Glow with the following settings = Color settings Fat and both black = Basic - Glow Width 3.00 and default on the other settings.

C/N/P Element 18 as new layer and resize by 50 % - repeat resize - duplicate - mirror - drop shadow on both. 

C/N/P element 2 as new layer and resize by 20%  - position as shown.

Add © info and any text.

Devil's Kiss

Tube of choice. I am using Sympathy for the Devil found HERE

Scrap Kit is Forbidden Love found HERE

Mask by Vix 72 found HERE

Open a new blank canvas 600 x 600.

C/N/P paper 3 as a new layer and apply your mask. Merge group and duplicate twice for a total of 3 mask layers. Merge all three.

C/N/P Frame 7 as a new layer and resize 90% making sure all layers is deselcted.

C/N/P Raster 4 of your tube as a new layer and position behind your frame layer. Hide your mask layer. Make your tube layer active and position the woman inside of the first frame, hide the tube layer. Make your frame layer active and with your magic wand select inside of the first frame, selections, modify, expand by 3, invert. Make your tube layer active once more and hit delete, selections, none. Now you will repeat the frame steps with the next two frames and a different selection of the tube.

C/N/P Moon as new layer, resize 50% and position as shown.

C/N/P Tree as new layer and position as shown, duplicate and mirror.

C/N/P Rose as new layer, resize 30% and position in bottom left of center frame, duplicate and mirror.

C/N/P Begonia as a new layer and resize 15% position in top left corner of first frame as shown, duplicate, mirror.

C/N/P Sparkles as new layer and position towards the bottom of the frame behind the rose layer.

C/N/P Candle 2 as new layer and resize 30% position as shown.

ADD ALL © INFO and any other saying you wish.

Autumn Bliss

SUPPLIES NEEDED

PSP

PLUGINS: XERO-BAD DREAM AND ALIEN SKIN

SCRAP KIT: FALL INTO ME BY MYSTICAL ILLUSIONZ FOUND HERE

MASK 60 BY WEESCOTSLASS FOUND  HERE

TUBE OF CHOICE. I AM USING THIS BEAUTIFUL PIECE FROM UNHOLY VAULT DESIGNS FOUND AT MPT. CLICK THE IMAGE AND IT SHOULD TAKE YOU THERE.

Unholy Vault Designs - Firefly PSP Tubes

Open a blank canvas 600 x 600. C//N/P paper 3 as a new layer. Layers and then load your mask 60 from image or disk. Merge group and add xero, bad dream with the following settings:

Paste your square frame as a new layer and resize by 65% making sure that the all layer box is deselected. Hide your mask layer and make your frame layer active. With your magic wand select inside the frame and add a new raster layer. Selections, modify, expand by 8 and paste your paper 13 into selection, select none. Position your paper behind your frame and then make your frame layer active and add a drop shadow to your liking. I used 0,0,100,11.

Copy and paste your close-up as a new layer and position as shown.

 Now add a drop shadow to your liking(I am using the same as before).
Duplicate your tube layer and position one below the frame and one above. With your top tube layer turned off make your bottom tube layer active and erase her left arm and bottom so it is behind the frame. Repeat this step on the top tube layer.
Copy and paste your sparklestars as a new layer and position as top layer. Position at bottom of frame as shown.
Copy and paste your ray of light as a new layer and position behind the frame and to your liking. Erase all of the light that comes out from behind the frame.
Copy and paste real butterfly as new layer and resize 55%. Make sure all layers is deselected.
Free rotate the butterfly layer to the left 25% and add a drop shadow.
Now you can choose what leaves you would like to use or you can use 2,4,5 like I did. Copy and paste each leaf and resize each 15% add a drop shadow and position as shown.
Copy and paste gerber as new layer, add drop shadow, resize 15%, position as shown.
Copy and paste doodle as a new layer and position in the corner as shown and as the bottom layer. Add a drop shadow.
Add © and any wording you would like and save. :)

Tainted Love

SUPPLIES NEEDED

PSP XI

PLUGINS : Eye Candy 4000

SCRAP KIT : Tainted Love by Mystical Illusionz found HERE

MASK : 43 by Urban Fairytales found HERE

TUBE OF CHOICE OR ELIAS ;) I am using

Elias Chatzoudis - Starfighter

 If you choose to use a different tube it will be best if it has a close up as well.  

1. Open new blank canvas 600 x 600

2. Selections - select all - paste MIZ_pp11 into selection - select none

3. Layers - new mask layer - from image UFMask43 with source luminance selected - merge group - rename this layer MASK and hide.

4. Copy and Paste (AKA C-N-P or C/N/P) MIZ_stampframe2 as a new layer - resize 65% and make sure all layers is deselected - rename this layer FRAME.

 5. With your magic wand tool hold down Alt and select the inside of each frame (make sure feather is set to 0) - Selections - Modify - expand 5.

6. Add a new raster layer and  C/N/P MIZ_pp8 into selection - select none and position the paper layer behind your frame.

7. Make your frame layer active - Effect - Plugins - Eye Candy 4000 - Gradient Glow with the following setting : 

8. Now this is where a working knowledge of psp or even better ... the ability to read my mind comes in. 

C/N/P Layer 1 of your tube or the close up of the tube you selected as a new layer - position behind the FRAME layer and above the paper so it has a certain part of the body that you wish inside that frame. Here let me post a pic lol so you have some kinda idea about my ramblings. 

 9. Hide the tube layer and make your frame layer active. With your magic wand select inside your frame - selections - modify - expand 5 - selections - invert - make your tube active again - delete - selections none.

10. Repeat with the right frame and a different body part.

11. C/N/P Raster 1 of your tube and position as shown.

12. Add a drop shadow with the following settings 

0;0;100;3;black

 13. Now duplicate that layer and position one layer above the frame and one below - eraser tool - erase her right foot on the top tube layer. You should have it looking like this : 

 14. Now you can make your MASK layer visible if you would like. C/N//P MIZ_rayoflight as a new layer and position at the very top center of your canvas. This ray should be the second layer. Your layers should be lined up like this.

15. C/N/P MIZ_lightfantasy as a new layer and position this behind your left frame layer or behind all but the pink paper layer.

16. C/N/P MIZ_diamondrain as a new layer and position behind all but MASK layer.

17. C/N/P MIZ_girlyskul2 as a new layer - position above FRAME and resize skull 25% - image - free rotate 20 right (make sure all layers is deselected) - gradient glow with the same settings as before.

Add any txt you wish but please make sure you add all © info.

Witchy Woman

SCRAP KIT : The Witching Hour

TEMPLATE : Bat Wing Soup

TUBES OF YOUR CHOICE. I USED THE BEAUTIFUL WORK OF : BARBARA JENSEN

PSP XI

PLUGINS EYE CANDY 4000

1. Open your Wing Bat Soup template.
2. Delete you © info.
3. Make your orange shape top layer active - selections - all - float - modify - expand 1.
4. C-N-P PP11 as a new layer - invert - with your paper layer active - delete -selections none - merge down.
5. Repeat steps 1-4 on layers orange shape bottom and large orange rectangle.
6. Make your bat layer active - image - mirror - flip  - resize - 60 % making sure all layers is deselected - resize by 60 once more.
7. Duplicate your bat layer twice so you have a total of 3 bats. :)
8. Position your bats to your liking or like mine - merge all three down.
9. Effects - plugind - eye candy 4000 - gradient glow with the following settings :

10. Make your White shape outline layer active - selections - all - float - expand 1 - flood fill with a Halloweenie looking gradient or really any color you think looks good. :P 

11. Make your middle white circle layer active - selections - select all - float - defloat - modify - expand.

12. C-N-P PP3 into selection - select none.

13. Repeat steps 11 and 12 to the last two white circle layers.

14. Adjust - add/remove noise to all three circle layers with the following settings.

15. Add a gradient glow to all three circles with the same settings as before.

16. Make your white rectangle layer active - selections -select all - float - defloat - modify - expand 1 and flood-fill with #6a190a - selections - select none - gradient glow as before.

17. Repeat step 16 with your white stripe layer and with the color #e37626.

18. Duplicate pixel word art and position on the right side as shown in mine.

19. Paste you tube of choice as new layer and position as shown.

20. With your second tube c/n/p as a new layer and position to your liking behind the orange rings. 

21. Make your orange circle layer active - selections - select all - float - defloat - invert.

22. Make your tube layer active ( tube behind the ring) carefully erase around the orange ring. 

23. Repeat this step to the other two rings and with a different body piece.

24. Change the circle tube layers blend mode to hard light.

25. With your crop tool crop around the entire canvas.

26. C/N/P WP_WH_PANSY as new layer and resize 65% and position as shown.

27. C/N/P WP_WH_PASIGN as new layer - gradient glow with same settings - position as show.

28. C/N/P WP_WH_CAULDRON as new layer - resize 50% and position as shown - add a drop shadow. I used black 0 and 0.

29. C/N/P WP_WH_FLAMINGGHOST as new layer and position behind the 3 circle layers as shown .

30. C/N/P WP_WH_PNG as new layer and resize 30% -drop shadow - mirror - position as shown.

31. C/N/P WP_WH_spiderweb as new layer and resize 50 position as shown - duplicate - position one layer as the  very top layer and one layer behind your White shape outline layer. With your eraser tool erase outside of your outline layer on both web layers.

32. ADD © INFO  and any other text you wish.

Delete backgound layer if you wish.